Motor oil performs three vital functions for your engine: cleaning, lubricating, and cooling. That's why an oil change is one of the critical routines that a car owner should not miss. Depending on your vehicle and the type of oil used, most manufacturers recommend changing the oil after a specific time or mileage. Other factors that may alter the period include various driving habits, the vehicle's purpose, and road conditions. For instance, if you drive on dusty roads, you may need to change your oil more frequently.
With several types of motor oil on the market, it's crucial to determine which one is best for your car. While changing your car's oil may improve engine performance, it may lead to severe mechanical issues if not done correctly or routinely. Some problems include valve damage, filter blockage, and camshaft breakdown, among others. Let's break down six types of motor oil and their functions.
is the most enhanced form of motor oil and does not contain any raw petroleum. Processed through a chemical engineering procedure, synthetic oil has smaller molecules compared to other oils. As a result, the oil lasts longer, is more resistant to heat, and is better for the environment. With a higher performing rate, full-synthetic oils can take you up to 10,000 miles without changing. There is no real danger to your engine if you replace your regular oil with a full-synthetic oil.
However, consult with your mechanic before you make the switch. If you drive frequently or use your vehicle for towing, a full-synthetic oil is usually the best option. If your car is prone to sludge formation, your mechanic will likely suggest full-synthetic motor oil. While it can cost more, it will save money that you would otherwise have to spend on repairs.
Conventional oil has been on the market longer than synthetic motor oil. While conventional oil isn't as effective as full-synthetic, it's still useful in engine lubrication. Initially, manufacturers used pure petroleum to make conventional oils. Modern formulas incorporate other chemicals to enhance performance.
The main drawback of conventional motor oil is that it tends to thin out at higher temperatures. It also condenses very fast when it gets colder. Also, with lower viscosity, conventional motor oil is more prone to sludge formation. For these reasons, most manufacturers recommend changing it after every 3,000 to 5,000 miles.
A synthetic blend consists of both conventional and full-synthetic oils. In contrast to conventional oil, a synthetic blend provides better lubrication and engine protection. It's also more heat-resistant and longer-lasting. Synthetic blends cost much less than a full-synthetic but are not as cheap as conventional oils. Experts recommend an oil change every 5,000 to 7,500 miles.
High Mileage Blend
A high mileage blend is suitable for vehicles with more than 75,000 miles on the odometer. With the car industry evolving, there is a need for practical lubrication solutions for hardy vehicles. A high mileage blend contains all the elements of synthetic oils with extra enhanced components. This enhancement perks up its performance in sludge resistance, lubrication, and degradation protection.
With good viscosity content, a high mileage blend protects the seals in high-mileage cars to avoid leaks. It also plays a significant role in safeguarding piston rings and sludge removal. High mileage blends cost much less than full-synthetic oils. They also last longer compared to regular oils.
Diesel oil is specifically for lubricating diesel engines. For a diesel engine to perform well, it requires a high viscosity lubricant. Most vehicles that consume diesel oils are trucks and other heavier cars. The engine in these cars combusts fuel at higher levels compared to other vehicles. Thus, the best oil should have the strength to withstand tremendous forces of up to 50,000 psi.
European oils are for use in luxury and European made vehicles. They differ depending on the car model. Nonetheless, most of them consist of a combination of full-synthetic oils and other additives. European oils are much more expensive than most other types of oils. Due to enhanced processing, European oils last longer, and you can change them less frequently.
Why Do You Need a Regular Oil Change?
Removing the Old Oil
The primary purpose of an oil change is to remove the contaminated oil in your engine. As oil breaks down over time, it forms some sludge, which clogs up and causes deterioration in your car's engine. Debris in the engine can eventually clog the oil filter and affect the oil flow in your car. As a result, you may end up dealing with more interrelated mechanical issues. Compared to the price of repairing your engine or buying a new one, an oil change is a viable alternative. Not only does it save you on maintenance cost, but it also lengthens the life of your car.
Enhance Gas Mileage
Various factors determine your car's mileage. Some of them include your driving habits and the environment that you drive in. Car maintenance plays a significant role in influencing your mileage. A regular oil change is more than necessary for someone who fancies driving at high speeds or lives in a dusty area. As old motor oil breaks downs, it loses its capability to properly lubricate your car's engine. As a result, your engine may not give you the gas mileage and performance you expect.
Regulate Cooling in the Engine
The cooling system in an engine requires a regular supply of fresh oil to perform well. Also, if the movable parts do not get proper lubrication, they may experience overheating. As a solution, regular oil changes prevent friction and engine overheating.
Are you looking for dependable experts to service your car? At Huffines Chevrolet Lewisville,
we understand the significant role of car servicing in prolonging your engine life. An oil change remains one of the regular routines we recommend for all types of cars. Armed with the best oils on the market, we ensure that you receive optimal service for your vehicle. Contact us today
to discuss which oil you should use.